Sonny's RVs
Wyoming RV dealer and repair shop in Evansville with RVTI-certified mechanics, 4.4 stars from 454 reviews.
Evansville, WY
RV refrigerator repair in Evansville, Wyoming
A warm fridge in Evansville is more than an annoyance. By the time you notice the ice cream softening, you have usually lost a day or two of food and a chunk of a trip. Two shops in town list refrigerator work, and one of them handles warranty claims. There are no mobile fridge techs based here, so plan on hauling the rig in rather than fixing it in your driveway.
Discover RV Refrigerator Repair in Evansville, WY
2Shops listed
4.4★Average Google rating
1Do warranty work
1More within 30 miles
RV repair shops in Evansville
Smith RV Sales and Service, Inc.
Family-run Evansville RV dealer since 1948, rated 4.4 stars, known for honest sales and a solid parts department.
Nearby options
Within a short drive of Evansville. Mobile techs on this list often cover the towns around them too.
Adventure Ready RV Solutions, LLC
Casper RV shop with a 5.0 rating, known for FlexArmor roofs and helping stranded travelers.
Who does fridge work here
Sonny's RVs carries the heavier review count, 454 of them at 4.4 stars, and lists certified techs, warranty work, parts on hand and weekend hours. Smith RV Sales and Service sits at the same 4.4 across 243 reviews and covers fridges alongside roof and awning jobs. Both stock parts, which matters with absorption units. A cooling unit, a control board or a burner assembly is rarely something you want ordered and waited on while the rig sits in the lot. Call first and describe the symptom: not cooling on gas, not cooling on shore power, or warm in the box with the freezer still fine. Each points somewhere different, and the shop can tell you whether the part is in stock before you drive over.
Gas, electric, or both
Absorption refrigerators fail in patterns. If it works on electric but quits on propane, you are usually looking at the burner, orifice or flue rather than the sealed cooling unit. If it is warm on both, the cooling unit or a blocked airflow path is the likelier culprit. Level the rig before you call, because an off-level fridge can quit cooling and then recover once it sits straight. Check that nothing is packed against the back wall inside and that the roof vent above the fridge is clear. Those few minutes of checking can save you a diagnostic charge.
Book ahead in camping season
Evansville sits just east of Casper, and once the Wyoming camping season starts, fridge appointments fill. Spring is the worst stretch, so call a week or two out if you can. If you are passing through and the fridge is already dead, say so on the phone. Shops often keep room for travelers, but not always. Ask about warranty pre-approval before any work starts if your rig is still covered. One of the two shops here does warranty work, so confirm which one handles your brand before you commit to a drop-off.
Specialists in Evansville
Nearby cities
- Casper, WY (1, 8 mi)
RV repair guides
Questions people ask
How many RV refrigerator repair shops are in Evansville, WY?
Two shops in Evansville list refrigerator repair. One of them also does warranty work, so check that shop first if your fridge is still under coverage.
Is there a mobile RV fridge tech in Evansville?
No mobile fridge techs are based in Evansville. Both listed shops are fixed locations, so you will need to bring the RV to them. The nearest mobile option is in a nearby town, but fridge work at a shop is usually the better fit anyway.
What should I check before paying for a diagnosis?
Level the rig, confirm the fridge is actually set to the right mode, and make sure the roof vent and the space behind the fridge are clear. Check that the burner lights on gas. If it cools fine on electric but not propane, tell the shop that, since it narrows the problem fast.
Do I need an appointment for fridge repair in Evansville?
Yes, book ahead, especially in spring and early summer when camping season starts. Calling also lets the shop confirm the part is in stock, which saves a second trip if a cooling unit or control board is needed.